Waveguide Mach-Zehnder biosensor with laser diode pumped integrated single-mode silicon nitride organic hybrid solid-state laser.

Single-mode organic solid-state lasers with direct emission into an optical waveguide are attractive candidates for cost-efficient coherent light sources employed in photonic lab-on-a-chip biosensors. Here, we present a combination of a dye-doped organic solid-state distributed feedback laser with a highly sensitive optical waveguide Mach-Zehnder interferometer on a silicon nitride photonic platform. This organic-hybrid laser allows for optical pumping with a laser diode in an alignment tolerant manner, which facilitates applications in point-of-care diagnostics. The sensitivity to bulk refractive index changes and the concentration dependent binding of streptavidin on a polyethyleneimine-biotin functionalized surface was studied to demonstrate the practicability of this cost-efficient coherent light source for optical waveguide biosensors.

In vivo human retinal swept source optical coherence tomography and angiography at 830 nm with a CMOS compatible photonic integrated circuit.

Photonic integrated circuits (PIC) provide promising functionalities to significantly reduce the size and costs of optical coherence tomography (OCT) systems. This paper presents an imaging platform operating at a center wavelength of 830 nm for ophthalmic application using PIC-based swept source OCT. An on-chip Mach-Zehnder interferometer (MZI) configuration, which comprises an input power splitter, polarization beam splitters in the sample and the reference arm, and a 50/50 coupler for signal interference represents the core element of the system with a footprint of only [Formula: see text]. The system achieves 94 dB imaging sensitivity with 750 [Formula: see text]W on the sample, 50 kHz imaging speed and 5.5 [Formula: see text]m axial resolution (in soft tissue). With this setup, in vivo human retinal imaging of healthy subjects was performed producing B-scans, three-dimensional renderings as well as OCT angiography. These promising results are significant prerequisites for further integration of optical and electronic building blocks on a single swept source-OCT PIC.

Toward optical coherence tomography on a chip: in vivo three-dimensional human retinal imaging using photonic integrated circuit-based arrayed waveguide gratings.

In this work, we present a significant step toward in vivo ophthalmic optical coherence tomography and angiography on a photonic integrated chip. The diffraction gratings used in spectral-domain optical coherence tomography can be replaced by photonic integrated circuits comprising an arrayed waveguide grating. Two arrayed waveguide grating designs with 256 channels were tested, which enabled the first chip-based optical coherence tomography and angiography in vivo three-dimensional human retinal measurements. Design 1 supports a bandwidth of 22 nm, with which a sensitivity of up to 91 dB (830 µW) and an axial resolution of 10.7 µm was measured. Design 2 supports a bandwidth of 48 nm, with which a sensitivity of 90 dB (480 µW) and an axial resolution of 6.5 µm was measured. The silicon nitride-based integrated optical waveguides were fabricated with a fully CMOS-compatible process, which allows their monolithic co-integration on top of an optoelectronic silicon chip. As a benchmark for chip-based optical coherence tomography, tomograms generated by a commercially available clinical spectral-domain optical coherence tomography system were compared to those acquired with on-chip gratings. The similarities in the tomograms demonstrate the significant clinical potential for further integration of optical coherence tomography on a chip system.

Multi-channel swept source optical coherence tomography concept based on photonic integrated circuits.

In this paper, we present a novel concept for a multi-channel swept source optical coherence tomography (OCT) system based on photonic integrated circuits (PICs). At the core of this concept is a low-loss polarization dependent path routing approach allowing for lower excess loss compared to previously shown PIC-based OCT systems, facilitating a parallelization of measurement units. As a proof of concept for the low-loss path routing, a silicon nitride PIC-based single-channel swept source OCT system operating at 840 nm was implemented and used to acquire in-vivo tomograms of a human retina. The fabrication of the PIC was done via CMOS-compatible plasma-enhanced chemical vapor deposition to allow future monolithic co-integration with photodiodes and read-out electronics. A performance analysis using the results of the implemented photonic building blocks shows a potential tenfold increase of the acquisition speed for a multi-channel system compared to an ideal lossless single-channel system with the same signal-to-noise ratio.

Slot-Waveguide Silicon Nitride Organic Hybrid Distributed Feedback Laser.

One of the major barriers for a widespread commercial uptake of silicon nitride photonic integrated circuits for cost-sensitive applications is the lack of low-cost monolithically integrated laser light sources directly emitting into single-mode waveguides. In this work, we demonstrate an optically pumped organic solid-state slot-waveguide distributed feedback laser designed for a silicon nitride organic hybrid photonic platform. Pulsed optical excitation of the gain medium is achieved by a 450 nm laser diode. The optical feedback for lasing is based on a second-order laterally coupled Bragg grating with a slot-waveguide core. Optimized material gain properties of the organic dye together with the increased modal gain of the laser mode arising from the improved overlap of the slot-waveguide geometry with the gain material enable single-mode lasing at a wavelength of 600 nm. The straightforward integration and operation with a blue laser diode leads to a cost-effective coherent light source for photonic integrated devices.

Analysis of silicon nitride partial Euler waveguide bends.

In this work, we present a detailed analysis of individual loss mechanisms in silicon nitride partial Euler bends at a wavelength of 850 nm. This structure optimizes the transmission through small radii optical waveguide bends. The partial Euler bend geometry balances losses arising from the transition from the straight to the bend waveguide mode and radiative losses of the bend waveguide mode. Numerical analyses are presented for 45-degree bends commonly employed in S-bend configurations to create lateral offsets, as well as 90- and 180-degree bends. Additionally, 90-degree partial Euler bends were fabricated on a silicon nitride photonic platform to experimentally complement the theoretical findings. The optimized waveguide bends allow for a reduced effective radius without increasing the total bend loss and, thus, enable a higher component density in photonic integrated circuits.

Integrated silicon nitride organic hybrid DFB laser with inkjet printed gain medium.

The provision of a coherent light source is a prerequisite for a variety of photonic integrated circuits. The integration of semiconductor laser diodes in disposable photonic devices in fields such as biosensing is, however, impeded by the competitive pricing in this application area. In this work, we demonstrate lasing of an alternative laser light source, namely an integrated hybrid organic solid-state distributed feedback laser for a silicon nitride photonic platform. The laser is optically pumped with a high power 450 nm laser diode and emits in the visible at 630 nm into a waveguide taper to reduce the cross-section to a single mode geometry. Inkjet printing of the organic gain medium enables a local, cost-effective, and flexible processing technology. The fabrication of the presented coherent light source is CMOS compatible and therefore highly interesting for co-integrated sensing platforms.

Hexaammineruthenium (II)/(III) as alternative redox-probe to Hexacyanoferrat (II)/(III) for stable impedimetric biosensing with gold electrodes.

Gold electrodes have been used in a wide range of electrochemical biosensors because their functionalization process with thiols has been well described and, in general, they offer good chemical stability. However, one of the most commonly used redox-pairs in electrochemical impedance spectroscopy, Hexacyanoferrate (II)/(III), causes corrosion of the gold electrodes and consequently damages the surface modification. This leads to alterations of the sensing signals, and thus, renders the quantitative and sensitive detection of target molecules virtually impossible. To overcome this problem we introduced the in-situ generation of Hexaammineruthenium (II)/(III) as redox-pair during the impedimetric measurement by applying a DC-bias. This DC-bias was chosen in such a way that it supplied Hexaammineruthenium (II) in a suitable concentration at the electrode surface by reducing Hexaammineruthenium (III). We compared the stability of photolithographically fabricated thin-film and screen-printed gold electrodes in Hexacyanoferrate and Hexaammineruthenium solutions. Further, long-time characterization of the electrochemical properties with cyclic voltammetry and electrochemical impedance spectroscopy revealed that Hexaammineruthenium (II)/(III) was an excellent redox-pair for stable impedimetric measurements with gold electrodes. To demonstrate the suitability of Hexaammineruthenium for biosensing we applied it for the impedimetric detection of human-IgG. This biosensor exhibited a linear range from 11.3 ng/mL to 113 µg/mL, which is a suitable range for diagnostic applications.

Human IgG detection in serum on polymer based Mach-Zehnder interferometric biosensors.

We report a new method for detecting human IgG (hIgG) in serum on integrated-optical Mach-Zehnder interferometer biosensors realized in a high index contrast polymer material system. In the linear range of the sensor (5-200 nM) we observed excellent signal recoveries (95-110%) in buffer and serum samples, which indicate the absence of matrix effects. Signal enhancement was reached by using secondary anti-human IgG antibodies, which bind to immobilized target IgGs and allow detecting concentrations down to 100 pM. This polymer based optical sensor is fully compatible with cost-efficient mass production technologies, which makes it an attractive alternative to inorganic optical sensors. Graphical abstract of the hIgG measured on polymer based photonic sensors using a direct binding assay and a signal enhancement strategy with secondary antibodies.

Streptavidin binding as a model to characterize thiol-ene chemistry-based polyamine surfaces for reversible photonic protein biosensing.

Biotin- and iminobiotin-bonded surfaces obtained by thiol-ene chemistry and subsequent modification with polyamines were characterized with respect to streptavidin-binding capacity and reversibility for photonic biosensing using X-ray photoelectron spectroscopy and Mach-Zehnder-interferometric sensors. The streptavidin-iminobiotin system was exploited for reversible multilayer deposition and determination of affinity constants on each layer.

Sensitivity and design of grating-assisted bimodal interferometers for integrated optical biosensing.

The sensitivity of bimodal waveguides for integrated optical biosensors is compared to single mode waveguides and grating-assisted bimodal interferometers are proposed as improved sensor concept. Grating-assisted bimodal interferometers are an elegant and compact sensor concept, which features easy fabrication and overcomes typical weaknesses of classical Mach-Zehnder interferometers. Long period gratings for mode conversion in the proposed sensor concept have been simulated employing the FDTD method. Such gratings give full control over the power distribution in the waveguides modes, which is not possible with other methods. Designs for three typical material systems are given and fabrication tolerances were investigated.

Monitoring dynamic interactions of tumor cells with tissue and immune cells in a lab-on-a-chip.

A complementary cell analysis method has been developed to assess the dynamic interactions of tumor cells with resident tissue and immune cells using optical light scattering and impedance sensing to shed light on tumor cell behavior. The combination of electroanalytical and optical biosensing technologies integrated in a lab-on-a-chip allows for continuous, label-free, and noninvasive probing of dynamic cell-to-cell interactions between adherent and nonadherent cocultures, thus providing real-time insights into tumor cell responses under physiologically relevant conditions. While the study of adherent cocultures is important for the understanding and suppression of metastatic invasion, the analysis of tumor cell interactions with nonadherent immune cells plays a vital role in cancer immunotherapy research. For the first time, the direct cell-to-cell interactions of tumor cells with bead-activated primary T cells were continuously assessed using an effector cell to target a cell ratio of 10:1.

Antireflective surface structures in glass by self-assembly of SiO2 nanoparticles and wet etching.

We describe the fabrication of an antireflective surface structure with sub-wavelength dimensions on a glass surface using scalable low-cost techniques involving sol-gel coating, thermal annealing, and wet chemical etching. The glass surface structure consists of sand dune like protrusions with 250 nm periodicity and a maximum peak-to-valley height of 120 nm. The antireflective structure increases the transmission of the glass up to 0.9% at 700 nm, and the transmission remains enhanced over a wide spectral range and for a wide range of incident angles. Our measurements reveal a strong polarization dependence of the transmission change.

Light trapping by backside diffraction gratings in silicon solar cells revisited.

This numerical study investigates the influence of rectangular backside diffraction gratings on the efficiency of silicon solar cells. Backside gratings are used to diffract incident light to large propagation angles beyond the angle of total internal reflection, which can significantly increase the interaction length of long wavelength photons inside the silicon layer and thus enhance the efficiency. We investigate the influence of the silicon thickness on the optimum grating period and modulation depth by a simulation method which combines a 2D ray tracing algorithm with rigorous coupled wave analysis (RCWA) for calculating the grating diffraction efficiencies. The optimization was performed for gratings with period lengths ranging from 0.25 µm to 1.5 µm and modulation depths ranging from 25 nm to 400 nm under the assumption of normal light incidence. This study shows that the achievable efficiency improvement of silicon solar cells by means of backside diffraction gratings strongly depends on the proper choice of the grating parameters for a given silicon thickness. The relationship between the optimized grating parameters resulting in maximum photocurrent densities and the silicon thickness is determined. Moreover, the thicknesses of silicon solar cells with and without optimized backside diffraction gratings providing the same photocurrent densities are compared.

Multi-step surface functionalization of polyimide based evanescent wave photonic biosensors and application for DNA hybridization by Mach-Zehnder interferometer.

The process of surface functionalization involving silanization, biotinylation and streptavidin bonding as platform for biospecific ligand immobilization was optimized for thin film polyimide spin-coated silicon wafers, of which the polyimide film serves as a wave guiding layer in evanescent wave photonic biosensors. This type of optical sensors make great demands on the materials involved as well as on the layer properties, such as the optical quality, the layer thickness and the surface roughness. In this work we realized the binding of a 3-mercaptopropyl trimethoxysilane on an oxygen plasma activated polyimide surface followed by subsequent derivatization of the reactive thiol groups with maleimide-PEG(2)-biotin and immobilization of streptavidin. The progress of the functionalization was monitored by using different fluorescence labels for optimization of the chemical derivatization steps. Further, X-ray photoelectron spectroscopy and atomic force microscopy were utilized for the characterization of the modified surface. These established analytical methods allowed to derive information like chemical composition of the surface, surface coverage with immobilized streptavidin, as well as parameters of the surface roughness. The proposed functionalization protocol furnished a surface density of 144 fmol mm(-2) streptavidin with good reproducibility (13.9% RSD, n=10) and without inflicted damage to the surface. This surface modification was applied to polyimide based Mach-Zehnder interferometer sensors to realize a real-time measurement of streptavidin binding validating the functionality of the MZI biosensor. Subsequently, this streptavidin surface was employed to immobilize biotinylated single-stranded DNA and utilized for monitoring of selective DNA hybridization. These proved the usability of polyimide based evanescent photonic devices for biosensing application.

Efficient coupling of narrow beams into polyimide waveguides by means of grating couplers with high-index coating.

The effect of a thin high-index coating deposited on polyimide waveguide grating couplers was investigated. A comprehensive numerical study was performed using an efficient simulation tool based on a Floquet-Bloch algorithm, and the results of this study were compared with experimentally obtained values for input coupling efficiencies. The application of a high-index coating permits efficient coupling from narrow beams even in material systems with a low index difference. This not only facilitates a denser integration of grating couplers but also permits low-loss lateral tapering to single-mode waveguides.

Nonlinearity of optimized silicon photonic slot waveguides.

In this numerical study, we show that by exploiting the advantages of the horizontal silicon slot wave-guide structure the nonlinear interaction can be significantly increased compared to vertical slot waveguides. The deposition of a 20 nm thin optically nonlinear layer with low refractive index sandwiched between two silicon wires of 220 nm width and 205 nm height could enable a nonlinearity coefficient gamma of more than 2 x 10(7) W(-1)km(-1).

Lateral leakage in symmetric SOI rib-type slot waveguides.

We theoretically investigate the lateral leakage in fully symmetric horizontal rib-type slot waveguides caused by coupling between the TM-like slot mode and a TE slab mode. The leakage mechanism is described and the dependence on the geometry parameters is studied using the variational mode-matching method. In addition, the effective-index method to solve the transcendent eigenmode equation of rib-type slot waveguides is applied and compared with the aforementioned rigorous numerical method. We show that this semi-analytical approach yields results with sufficiently high accuracy. For design purposes the influence of structural deviations caused by the fabrication process is studied. We show that the usable range of the geometry parameters can be widely extended by exploiting leakage suppressing mechanisms.